2.4 GHz is a world-wide band that has many applications and users.
The sets currently available are of the “spread spectrum†variety and hence need no frequency control.
It can be used to control any type of model either ground based, water or airborne (within the constraints of the law of course).
Current sets have the facility to reduce power in order to perform a range check, use this facility in line with the manufacturers instructions.
It is suggested that clubs utilising the “peg on†method of frequency control have a separate 2.4 GHz section for members to place a named peg.
Club rules governing the number of models airborne at any one time should still reflect the needs and circumstances of the particular flying site.
2.4 GHz transmitter aerials should display a black ribbon.
There is no evidence to suggest that 2.4 GHz transmitters will interfere with users of 35 MHz.
The use of this band combined with spread spectrum technology will eventually help to alleviate the risk of lone flyers interfering with nearby club operations.
This technology has been in regular use in other countries for over a year with few reported problems.
Follow manufacturers instructions and guidance on installation into your airframe.
At events operating transmitter control 2.4 GHz transmitters should be booked in and accounted for as normal, however there is no requirement to check frequency and the decision on when the pilot flies rests with the CD or Flight Line Director.
Follow guidance provided by the manufacturer of your specific set on it’s operation.
The effectiveness and safety of any equipment still relies on care and vigilance of the user.
