JR 3810

[Steve Smith]

I am looking for the method to change a JR3810 from Mode 2 to Mode 1.  There are two different radios, this is the chinese one.

[BBReaper]

You could try the following :

Hold down the two left most programming buttons, and power on the radio. This should take you into the system programming mode.

In the menu, look for the "STICK" option, and set it for to your desired mode (1,2 or 3)

Once set, power off the radio.

Remove the rear cover, and shift the ratchet system for the throttle on the sticks. (do so at your own risk)


If that doesn't work, learn to fly on mode 2 

[bloogyct]

If it is an ADT version - you will have to get Dave Armitage to do it for you - it is not possible to change it in the system menus!